Payment & Shipping Terms:
|Number Of Soldering Foot:||40 Pins||Product Type:||LAN Isolation Transformer|
|Mounting Type:||SMT SMD||Transmission Speed:||10 / 100 Base T|
ethernet magnetic transformer,
ethernet lan transformer
LAN Isolation Transformer 10 / 100 Base Ethernet Isolation Transformer SMT SMD Mounting
GLGNET LAN Isolation Transformer intended for RJ45 jack applications are compatible with wide a set of Ethernet PHY chipsets supporting VOIP, PoE, PoE+ and PoE++ and data rates including 10/100Base-T, 1000Base-T and 10GBase-T for networking and industrial applications.
GLGNET LAN Isolation Transformer Main applications as following:
This is not a definitive list of applications for this product. It represents some of the more common uses.
GLGNET Supplies variety LAN Isolation Transformers and RJ45 Modular Jacks with Integrated Transformer;
Some customers would like to buy RJ45 Modular Jack without magnetics and Isolated Transformers seperately based on their available PCB design, also this way can save cost.
GLGNET can meet your requirements, both RJ45 Modular Jack without magnetics + isolated transformer and RJ45 modular Jack with integrated Magnetics, we can supply;
GLGNET not only supply standard Ethernet isolation Transformer, we also support Customization as required, GLGNET custom service include:
Complies with requirement of IEEE 802.3u standards
including 350uH OCL with 8mA bias.
Symmetrical TX and RX channels for Auto MDI/MDIX
Operating temperature range: 0℃ to +70℃.
Storage temperature range: -25℃ to +125℃
Compatible with 10 / 100 Base- T PHY ICs
ROHS peak reflow temperature rating: 245℃
Low profile package designed for PCI Express
2250 VDC @ 60 Seconds Hi-po
2. Product Structure
3. Electrical Specification
|Operating Temperature||0 ℃ to 70 ℃|
|Storage Temperature||-25 ℃ to 125 ℃|
350uH MIN@ 100KHz/100mV with 8Ma DC Bias
|Insertion Loss (IL)||-1.1dB MAX @ 0.3MHz – 100MHZ;|
Return Loss (RL)
Z out = 100 OHM
-18dB MIN @ 0.3MHz – 30MHZ;
-14dB MIN @ 30MHz – 60MHZ;
-12dB MIN @ 60MHz – 80MHZ;
|-35dB MIN @ 0.3MHz – 100MHZ|
|Common Mode Rejection Ratio (CMRR)||-30dB MIN @ 0.3MHz – 100MHZ|
|CW/W||56 pF Max|
|L.L||0.5 uH Max|
|HI - POT||2250 VDC @ 60 Seconds|
4. Why Choose GLGNET?
Contact Person: Johnson Gao